Sponsors

Weekly Checks - Tyre tread wear patterns

Shoulder Wear

Underinflation (wear on both sides) Underinflation will cause overheating of the tyre, because the tyre will flex too much, and the tread will not sit correctly on the road surface. This will cause a loss of grip and excessive wear, not to mention the danger of sudden tyre failure due to heat build up. Check and adjust pressures Incorrect wheel camber (wear on one side) Repair or renew suspension parts Hard cornering Reduce speed!

Center wear

Overinflation OVer inflation will cause rapid wear of the centre part of the tyre tread, coupled with reduced grip, harsher ride, and the danger of shock damage occurring in the tyre casing. Check and adjust pressures, If you sometimes have to inflate your car's tyres to the higher pressures specified for maximum load or sustained high speed, don't forget to reduce the pressures to normal afterwards.

Uneven Wear

Front tyres may wear unevenly as a result of wheel maisalignment. Most tyre dealers and garages can check and adjust the wheel alignment (or "tracking") for a modest charge. Incorrect camber or castor Repair or renwew suspension parts Malfunctioning suspension Reair or renew suspension parts Unbalanced wheel Balance tyres Incorrect toe setting Adjust front wheel alignment Note: The featherd edge of the tread whcih typifies toe wear is best checked by feel.
 
RocketTheme Joomla Templates